Manufacturing Facilities At MECHON Process Equipments

FABRICATION UNIT – I

* Total Area     7000 Sq.M

* Area under Crane     1000 Sq.M

* Area for Storage of material : Open area(Mobile cranes used)       6000 Sq.M

MACHINING UNIT – II

* Total Area       400 Sq.M

* Covered Area 400 Sq.M

FACILITIES

Bending Capacity: - Plate Bending machine of capacity 3000X50 mm thk.

Handling Capacity: - Overhead Crane of 15 Tons Capacity

Machining Capabilities

1 Slotting Machine 1 No.

2 Horizontal Boring 100 mm Spindle 1 No.

3 Milling Machine 2 No.

4 Shaping Machine 1 No.

5 Lathe 16 ” -22 ”Center Height 1 No.

6 Lathe 12 ” -20 ”Center Height 1 No.

7 Lathe 10 ” -10 ½ ”Center Height 1 No.

8 Lathe 9 ” -9 ½ ”Center Height 1 No.

9 Lathe 6 ½ ” 1 No.

10 Lathe 4 ” -6 ”Center Height 1 No.

Fabrication Capabilities

1 Generator Welding Set 4 Nos.

2 Drill Machine 2” Capacity 2 Nos.

3 Drill Machine 1 1/2 ” Capacity 1 No.

4 Drill Machine 1 ” Capacity 1 No.

5 Hand Magnet Drill Machine 3 Nos.

6 A. G. 7 Hand Grinder 3 Nos.

7 Pug Gas Cutting 6 Nos.

8 Kirloskar Make D.G. Set 100 H.P. 1 No.

9 Hex Saw Machine 14 ” 6 Nos.

10 Hand Magnet Drill Machine 3 Nos.

10 Co2 Welding Machine 4 Sets

Quality Control Equipments

1 Outside Micrometer. 0 to 50 mm.

2 Outside Micrometer. 50 to 150 mm.

3 Outside Micrometer. 150 to 300 mm.

4 Outside Micrometer. 400 to 500 mm.

5 Outside Micrometer. 500 to 600 mm.

6 Inside Micrometer. 50 to 300 mm.

7 Inside Micrometer. 50 to 1000 mm.

8 Vernier Caliper. 0 to 200 mm.

9 Vernier Caliper. 0 to 500 mm.

10 Vernier Caliper. 0 to 1000 mm.

11 Depth Gauge. 0 to 100 mm.

12 Depth Gauge. 0 to 300 mm.

13 Depth Gauge. 0 to 500 mm.

Infrastructure

         Call Us

+91 9096 131 123